Published at Friday, 17 August 2018. Patio Table. By Lottie Osborne.
I use my spacer to make sure that they lined up perfectly. After that was all done, I took one 2x6 and lined it up with the bottom side, rail and screwed - that on once I was done. I grabbed my spacer and I grabbed a 2x4 and glued and screwed it up to the second side rail. Once that was all done, I grabbed another 2x4 and glued and screwed it up to the back. So the whole railing around the chair was the same. Next, I took my two by twos and glued and screwed that I'm flushed to the bottom of the second railing inside the chair.
I screwed in the other 2x4 on the other side, then I repeated the whole process over again for the other side, rail once that was all done. I took another 2x4 and glued and screwed on the top. Once again, I did it on this one, and then I moved on and did on the second side, rail as well after that was all done. I place the board in between the slats to kind of help me hold up the sides to make putting on the back in the front a little easier. I took two by sixes and lined them up with the two by sixes on the side, rails and screwed them in all the way up the back of the chair once it can.
After that, I laid out the boards I needed for the side rails of the chair. I lined up the 2 by 6 to the 2x4 and screwed it in. Once that was all done. I grabbed a space, threw board and did the next side rail down after I got that one screwed in I removed the spacer board to the next one and did the very last side rail the same way. Once that was all done.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 cbtexplained.com. All Rights Reserved.