Published at Sunday, 02 September 2018. Storage Bench. By Bettye Harrell.
I secure the lower rails And then I moved on to the panels. I drilled pocket holes on the sides to join the legs and one on the top of the panel to attach the walnut feet later Since 3/4 inch plywood isn't really 3/4 of an inch. I use some playing cards to shim the panels up and make them flush with the inside face of the legs. Then I locked everything in place with some more pocket screws. The base of the bench will be painted and for a smooth surface, I wanted to fill the pocket holes.
I made one cut to define the depth of the rabbit and then I raised the blade to match the leftover material and cleared out the rest of it. With another cut You can see, I went a little deeper than I needed to on that first cut, but it won't affect the function. The legs are joined by a pair of side rails. I started by cutting one by fours to length. Then I rip them down to get two rails out of each piece. That'll be one by two.
Shoe storage bench, It's a great project to wrangle all those shoes that you got laying around the house. Let's check it out and see how we did it. The sides of the Bench have a modified frame and panel construction. I started by cutting the legs to size from two by two material. The bench is going to have a quarter inch plywood back also, So I laid out a recess or a rabbit into the back legs to hold apply.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 cbtexplained.com. All Rights Reserved.