Published at Saturday, 01 September 2018. Storage Bench. By Millicent Curry.
Mid-century modern slatted bench. This is modeled after this famous nelson bench, designed still being produced today. It's a pretty simple build. But you can build this whole thing really, with a circular saw and a drill. You could build this out of all one by twos and one by threes from them as well. So a really great project, if you like this kind of modern style and kind of will take your joinery and that kind of thing to the next level.
So let's go ahead and get started, so I built this project out of eight quarter, hard, maple and oak, but you could also just use a mix of one by twos and one by threes from your local home center. If you don't have the equipment to mill rough lumber, it was a ton of work ripping down the maple strips and I would have just bought the lumber already milled.
If I didn't already have the maple on hand, I rip the maple into three-quarter inch by inch and a half strips on the table saw and if you're, using one by twos you'll want to purchase seven eight foot long, one by twos for the bench top and cut them into 48 inch long pieces once I mailed the maple into strips, I cut two of the strip's into 24 inch long sections and these short sections make up the horizontal cross members that run at each end and in the middle of the bench, top the middle cross member is twice as wide as you can see here, so I also glued up a pair of these cross members. I built three of these benches in total.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 cbtexplained.com. All Rights Reserved.