Published at Sunday, 02 September 2018. Storage Bench. By Delia James.
So what I did was, I used the half inch plywood birch and I cut three-inch strips out and width and created a box on all the sides where at the top of the bench I used 3/4 inch plywood and to make the round over edge. Look. I had the lip come out 1/4 of an inch past the frame, and then I rounded it over with the router to attach the lid to the bench I used piano hinges to paint the entire bench. I used a paint sprayer and used a primer paint mix. Just a white color for any imperfections you have or anything that might be showing you can always use white Culkin to hide it.
I used the circular saw with the jig that I made to cut straight lines, and this was used to cut half inch birch plywood for the exterior of the box, which would go around the 2x4 frame here. You'll see that I'm just gluing up the frame putting on the half-inch birch plywood clamping it down before I Brad nail it together. Now I wanted the storage bench to have a shaker look.
So let's start and make these benches. I first started out making the frame of the storage bench using two by fours, and I cut them out with my miter, saw and used wood glue and Brad's nails to first hold the structure of the frame, and then I used wood screws to hold them in Place to hold the other pieces of wood together, hopefully, by the time you get to see it next, you just want to sand down your frame a little bit just to make sure you don't get any splinters.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 cbtexplained.com. All Rights Reserved.