Published at Sunday, 02 September 2018. Storage Bench. By Elisa Glover.
Entryway bench. You're going to need the following step number one cut your board here to cut one board at 6 feet long. One board five feet: nine inches two boards at 16 and 1/2 inches and to board the 14 inches step2 drill some pocket holes and for all you, haters aphasia drill to me pocket holes.
I don't care so in the 16 and 1/2 inch long boards, you're gonna drill 4 pocket holes on one end and the 14-inch boards. You will drill two pocket holes on each end and on a 5 feet, 9 inch portable four pocket holes on each end, step 3 assemble the bench using the 2-inch pocket hole, screws we'll first attach 2, 16 and 1/2 inch boards to the top next attach.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 cbtexplained.com. All Rights Reserved.