Published at Saturday, 25 August 2018. Storage Bench. By Marcy Dillon.
Corner bench storage. This table is four feet long, so another person can sit next to you and wear their shoes. When you do it, it comes with a storage cabinet at the bottom, where you can store your shoes and your shoe care supplies. I stay in the side, woods and it gives a good contrast to the color scheme. I put a small trim in the front so that, when I put a cushion here, it does not move around.
So let me show you how I made this. I start by ripping the 18 mm plywood to correct dimensions before joining the sides. I prefer to date of the edges. I check if the dado is correct. I measure equal distance and mark the place to per-drill the holes using wood glue. I attach the sides the 3d printed corner clamp, helps to keep the joint square after. I repeat the same steps on the other side, I flip the sides of the top piece. I am going to use 6mm plywood as backing so using a scrap. I mark the space required on the top piece I mark with a scrap 18 mm plywood, where I have to drill then mark and countersink the holes before, attaching it with glue and screw.
This is how it looks after fixing the top to put in the center partition. I mark equal distance, then, with the scrap I mark, where the middle piece will be screwed to I nicely board to make it square to the sides with the square. I find the center of the partition plywood and extend it on to the sides. This helps me incorrectly drilling into the partition plywood. I flip the bench to attach the 6mm sheet to the back. The back sheet is what that gives the bench its strength.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 cbtexplained.com. All Rights Reserved.