Published at Saturday, 01 September 2018. Storage Bench. By Ina Kerr.
That'll be one by two. After that I drill pocket holes in the ends of all the rails Before joining the rails on the legs. Together, I cut the side panels to size from 3/4 inch. Plywood I laid the legs in the rails face down, and then I secured the top rail with screws. Then I use the panels that I just cut to position the lower rail. This eliminates any room for error and measuring and give that exact match. I secure the lower rails and then I moved on to the panels. I drilled pocket holes on the sides to join the legs and one on the top of the panel to attach the walnut feet later, Since 3/4 inch plywood isn't really 3/4 of an inch.
I use some playing cards to shim the panels up and make them flush with the inside face of the legs. Then I locked everything in place with some more pocket screws. The base of the bench will be painted and for a smooth surface I wanted to fill the pocket holes. My intent here was to show you this cool little jig that I made to cut my own plug from dowels, But, as it turns out, installing these plugs was a huge pain in my neck.
Shoe storage bench, It's a great project to wrangle all those shoes that you got laying around the house. Let's check it out and see how we did it. The sides of the bench have a modified frame and panel construction. I started by cutting the legs to size from two by two material. The bench is going to have a quarter inch plywood back also, So I laid out a recess or a rabbit into the back legs to hold apply.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 cbtexplained.com. All Rights Reserved.