Published at Tuesday, 04 September 2018. Storage Bench. By Lottie Osborne.
All the dust stays out and it's not getting all over everything in the garage you'll see most of the tools I'm using the saw for both saws and the routers they're all garage sale items - I probably don't even have $ 100 and the three of them up. The screw gun in the drill they were bought brand-new, but I like using this stuff outside it's small and easy to move around. I don't want to drag out all the other stuff. So when I came up with the plans for this, it was all based off an old rotten chair that a buddy of mine gave me. I just took it apart and took all the measurements and traced all the pieces.
That's where I got the plans from. I didn't buy any plans, this wasn't anything official but uh. When I was coming up with this, I took the time to plan out each cut on the board. So that way I would have the least amount of scraps possible. I wanted to get the most for my money, so here I'm just using a little bit of masking tape and I write what each of these boards is and then I just leave the board with the masking tape and the label on top and put all the Pieces under it that way, I don't get confused as to what piece is what, because some pieces are close to the same size as others.
If I could make one it's bench with cooler style, I've been making chairs that are similar to this for all. Ever since I started woodworking a few years ago, so I just took that design that I already had and pretty much added this cabinet to the center. That just opens up to your cooler in the middle.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 cbtexplained.com. All Rights Reserved.