Published at Wednesday, 05 September 2018. Storage Shed. By Nichole Doyle.
We have a space on the side. If we want to put a little lean-to or something we have like five feet on the right side and that's the only reason we have out there. So when you see in the videos we're going to have space on the right side and only because we had to literally extend the foundation, so we just took out one side, the left side cut out five more feet, filled it with gravel and then framed it All in so now we have, I don't know it's a lot wider than the actual shed, which is just because we had to move it over more. Overall, it was a lot of fun. I have a big family.
I have four brothers and I have three sisters. So we had a lot of help all the time. This isn't something I would ever do by myself yeah. I am, I think, I'm a strong person but like thank you I'll, take all out buy it. Yet we started with a rock a gravel foundation.On top of the gravel we put cement cottage stones, cobblestones cottage stones - I don't know square bricks like stones - are about one inch thick by like this big put skids on top 4x4 treated lumber skids on top of the stone the bricks, and we have three of Them so one two, three three ding-ding-ding bricks underneath gravel underneath so we have probably for this is probably a good six inches above the ground before the floor.
I mean he's on the fence the floor, joist to the skits. How we have all of our joists screw to the end boards and according to Phil, it's time to level up we're a level it up with that level you how my slave brother put some of these nails in here, so I have an easier job. No, I can't do it right all right, somebody's having a bad day, nails, psych, okay, yeah! You can probably guess that my next investment was a nailed to buy 40, this sheet of plywood, so we can use it as a guide for the saw we cut plywood into strips, and then we cut them into webbing pieces to connect our trust pieces template for The webbing and I'm chasing them out, so she can cut up all right. We're all set up to cut our trusses and it's a be pretty easy, because all three cuts are going to be at twenty two and a half degree angles and they're all the same length. So it'll be easy.
Any content, trademark’s, or other material that might be found on the cbtexplained.com website that is not cbtexplained.com’s property remains the copyright of its respective owner/s. In no way does cbtexplained.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 cbtexplained.com. All Rights Reserved.